Hi Vaun,
When setting up, I usually connect LAN2(WAN) port to a LAN port that has Clear Line of Sight to the internet. Once you've uploaded the config from USB, you should see it your Org.
Then you can configure everything (saving as you go), *except* your WAN interface, as you'll lose connectivity when you update the WAN I/F.
Last action is to configure the WAN interface as per production requirements, then save the config ... the config will download to the Edge and update.
Cheers,
Mal.
------------------------------
Thanks and regards,
Malcolm Green
Nexon Asia Pacific
------------------------------
Original Message:
Sent: 09-22-2020 03:36
From: Vaun McCarthy
Subject: Edge Mini Ports?
I'm a bit confused as to the pairing/cabling process for a mini Edge. They only have LAN1 and LAN2, ie no labelled WAN port. The quick start sheets seem to imply ONLY using LAN2. So what exactly is the process for these type of EDGE? Do you connect the LAN1 port to the WAN network segment like you would on a v3 Standard Edge, and use the LAN2 for your LAN segment? Or do you actually only use the LAN2 port in which case that would mean both your LAN and WAN connections are using the same segment, IP etc.
#Ask Me Anything (AMA)
#ArchitectureandDesign
#Implementation
#Telephony
#Unsure/Other
------------------------------
Vaun McCarthy
NTT New Zealand Limited
------------------------------