I have an example task given as an export of an Architect Flow and wish to incorporate it in another Architect Flow I am developing. I can manually do this but wanted a way that it can be incorporated with cut and paste so no there not errors. It seems this cannot be done from what I read but wanted to double check with the community.

Thanks in advance
Michael Oldham
#Implementation

Solved - had to work in the same tab.

Not sure if some of that new Archy stuff might help too - not looked into any of it.

------------------------------
Vaun McCarthy
NTT New Zealand Limited
------------------------------

Original Message:
Sent: 10-17-2020 21:21
From: Michael Oldham
Subject: copying a task between architect inbound flows

I have an example task given as an export of an Architect Flow and wish to incorporate it in another Architect Flow I am developing. I can manually do this but wanted a way that it can be incorporated with cut and paste so no there not errors. It seems this cannot be done from what I read but wanted to double check with the community.

Thanks in advance
Michael Oldham
#Implementation

Solved - had to work in the same tab.

Hi Michael, you can do the copy-paste by clicking on 3 dots next to your task.
In the new flow, you just click on "add reusable task here" and your task should be on the bottom of the menu:


------------------------------
Piotr Danielewski
Ernst & Young Global Services Limited
------------------------------

Original Message:
Sent: 10-17-2020 21:21
From: Michael Oldham
Subject: copying a task between architect inbound flows

I have an example task given as an export of an Architect Flow and wish to incorporate it in another Architect Flow I am developing. I can manually do this but wanted a way that it can be incorporated with cut and paste so no there not errors. It seems this cannot be done from what I read but wanted to double check with the community.

Thanks in advance
Michael Oldham
#Implementation

Solved - had to work in the same tab.

Thanks for this extremely useful tip!

Worked like a charm, you saved me a night work!

------------------------------
R. Reinold
------------------------------

Original Message:
Sent: 10-18-2020 11:29
From: Piotr Danielewski
Subject: copying a task between architect inbound flows

Hi Michael, you can do the copy-paste by clicking on 3 dots next to your task.

In the new flow, you just click on "add reusable task here" and your task should be on the bottom of the menu:

The key here, is that it has to be within the same browser and the same tab - that's the only way it was working for me.

Good luck!

------------------------------
Piotr Danielewski
Ernst & Young Global Services Limited

Original Message:
Sent: 10-17-2020 21:21
From: Michael Oldham
Subject: copying a task between architect inbound flows

I have an example task given as an export of an Architect Flow and wish to incorporate it in another Architect Flow I am developing. I can manually do this but wanted a way that it can be incorporated with cut and paste so no there not errors. It seems this cannot be done from what I read but wanted to double check with the community.

Thanks in advance
Michael Oldham
#Implementation

Solved - had to work in the same tab.