All,
Again reaching out to our resident experts on a new issue that we're currently working through.
We are standing up a new 2021 R4 switch pair and we ran into issues after running setup assistant. We learned that all the ports between both IC servers were not opened during our install. Long story short the switch pair is up and both servers do see each other, however the ServerGroup certificates aren't correct.
Our current and functional switch pair shows SwitchoverA cert in the ServerGroup folder of the backup server (or SwitchoverB).
This new and not working properly switch pair shows it's own SwitchoverB cert in this folder.
We've attempted to run Setup Assistant >> Switchover on SwitchoverB and import the SwitchoverA cert + SwitchoverA Private key which does work however once we reboot the server IC never starts, it remains in a "Starting" status.
Question is, has anyone encountered a similar issue? If so any suggestions on what to try?
We may try reinstall Switchover again on SwitchoverA first then SwitchoverB second, to see if this resolves.
Thanks all,
#Implementation#PlatformAdministration#Security#SystemAdministration------------------------------
Shane
------------------------------