Genesys Cloud - Main

 View Only

Sign Up

Back to discussions
Expand all | Collapse all

Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

  Thread closed by the administrator, not accepting new replies.

  • 1.  Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 02-04-2020 10:32
    No replies, thread closed.

    Hi, we started to have a problem with a customer where calls are being dropped after 30 minutes in the conversation. In those calls (inbound calls), the customer and the agent are talking with no problem and suddenly the call disconnects and when we query the conversation details we can see the following error:

    ...
    "errorCode": "error.ininedgecontrol.connection.protocol.timeout",
    "disconnectType": "error",
    "segmentType": "interact",
    ...

    As I said, the duration of all those calls being dropped is around 30 minutes (+0, +1 or +2 minutes.)

    This customer uses BYOC, we talked to the provider but they don't see anything wrong on their end, there's no timer. I also reached out to Genesys support to see if there's a setting in PureCloud that prevent from having a conversation more than 30 minutes but they said there is no such parameter.

    Thanks,


    #SIP/VolP
    #Telephony

    ------------------------------
    Henry Zambrano
    Powernet Global Telecommunications
    ------------------------------


  • 2.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 02-05-2020 10:33
    No replies, thread closed.
    Hello Henry, 

    We had run into something very similar in the past, is it on every call that you experience this?   Have you been able to run any traces to see which side is requesting an update and which side is not responding? 

    What happened for us was that any call originating from PureCloud to our other carrier would drop after 2min - after running sip traces we could see that for us the other carrier was asking PureCloud for an update but the edge was ignoring it - and so the call would disconnect. 

    Similar experience.. so i thought i'd share :)

    ------------------------------
    Kymberli O'Hagan
    TBD
    Alberta Motor Association
    ------------------------------



  • 3.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 02-06-2020 18:32
    No replies, thread closed.
    Hi Kymberli, thanks for your response. I have an open case with Genesys. In the first instance, they said that it was an known issue due to a change made last Friday but that they rolled back on Sunday. However, they are still investigating because we still have the same issue (it has something to do with Edges).
    I'll post what they find.

    Thanks,

    ------------------------------
    Henry Zambrano
    Powernet Global Telecommunications
    ------------------------------

    Original Message


  • 4.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 02-06-2020 22:29
    No replies, thread closed.
    Hey Henry, It's interesting.. over the last couple days we are actually seeing that same error come up with agents that are using the PureCloud Softphone Client. We have been piloting it to see if we can use it within some areas of our business, however we continue to have protocol errors. This one is a different kind of protocol error to what we've seen before.. and in some cases the call either drops, has static, has no problems (just an error) or it doesn't connect to the agent at all. 

    We have an open case now as well.

    ------------------------------
    Kymberli O'Hagan
    TBD
    Alberta Motor Association
    ------------------------------

    Original Message


  • 5.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 02-07-2020 12:40
    No replies, thread closed.
    Kymberli,

    What protocol are you using for the PureCloud Softphones?

    Also, one thing I have seen mentioned before is to ensure you select the network interface to use in the Softphone options instead of letting it automatically select. Especially if the computer has multiple network interfaces (like VPN, WiFi, ethernet, etc.)

    ------------------------------
    George Ganahl GCP (PureCloud), ICCE
    Principal Technology Consultant
    Genesys
    ------------------------------

    Original Message


  • 6.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 02-07-2020 15:19
    No replies, thread closed.
    Hello George, 

    We are using TCP for the Softphones.

    ------------------------------
    Kymberli O'Hagan
    TBD
    Alberta Motor Association
    ------------------------------

    Original Message


  • 7.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 08-28-2020 17:43
    Edited by Jorge Negri 08-28-2020 20:16
    No replies, thread closed.
    Hi.

    We are currently facing the same error (Protocol Timeout error) affecting agents that are using the PureCloud Softphone Client.

    It is also impacting on many other of the users of the platform, all of them using PureCloud Softphone as well, at our customer's site, while attempting to start any manual outgoing call.

    TCP is configured in the Phone trunk  and also on the SIP External Trunk.

    Opened a Support Case, but still no clear answers, and of course no solution delivered yet

    The customer is very unhappy, and upset about this problem.

    Thanks

    Regards,

    ------------------------------
    Jorge Marcelo Negri
    Senior Project Consultant
    Genesys PureCloud Certified Associate
    In Motion Argentina
    Ciudad Autónoma de Buenos Aires
    Argentina
    ------------------------------
    -------------------------------------------


  • 8.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 08-28-2020 18:10
    No replies, thread closed.
    Hi Marcelo, I don't know if the issue we had is similar to yours, however, in my case there's was a problem with the carrier's SBC (this customer was BYOC).
    Genesys support said that the call would have this problem (dropped) because the SDP which was sent out by PureCloud was not picked up and acknowledged by the Carrier's SBC. So the error found in the traces was "Description: No response from SIP Session Timer refresh."

    So they suggested two options:

    1: You'll need the carrier's SBC to add OPUS & PCMA to their SDP

    OR

    2: You can request the carrier disables session refresh.


    I shared that info with the carrier, however they said that the SBC was not doing anything with codecs, that it simply passed thru the info. And on the other hand, they could disable the session refresh. However, I cannot confirm which of those options was the fix for the issue. I assumed they did something because the problem was fixed.

    Regards,
    Henry



    ------------------------------
    Henry Zambrano
    Powernet Global Telecommunications
    ------------------------------

    Original Message


  • 9.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 08-28-2020 20:01
    Edited by Jorge Negri 08-28-2020 20:18
    No replies, thread closed.
    Thanks Henry.

    But our environemnet is different than yours.

    We are behind Avaya, connected to that PABX with a SIP Trunk.

    All incoming calls and ourgoing calls recieved from Avaya  whick works as our voice Gateway towards the PSTN.

    And these problems were not present before, but appearing since some weeks by now.

    Unfortunately we have not yet been able to solve this problem, and we have the customer very upset about this.


    May be someone can give help to have this problem addressed and solved.

    Thanks in advance for your attention and reply.

    Regards,


    ------------------------------
    Jorge Marcelo Negri
    Senior Project Consultant
    Genesys PureCloud Certified Associate
    In Motion Argentina
    Ciudad Autónoma de Buenos Aires
    Argentina
    ------------------------------
    -------------------------------------------


  • 10.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 09-10-2020 03:36
    No replies, thread closed.
    Hi Jorge,

    This Protocol timeout message is usually related to network issues.

    I've had a lot of problems with old versions of the PureCloud softphone. Please make sure you are running the latest one.

    Softphone version 3036 is currently the release which performs better in handling the network losses.

    ------------------------------
    Paulo Mesquita
    Spark NZ Trading
    ------------------------------

    Original Message


  • 11.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 09-10-2020 07:53
    No replies, thread closed.
    Thanks

    Softphone is running on the last version available (16.2.0.3036).

    Unfortunately we are still facing these problems at the customer's site.

    Regards


    ------------------------------
    Jorge Marcelo Negri
    Senior Project Consultant
    Genesys PureCloud Certified Associate
    In Motion Argentina
    Ciudad Autónoma de Buenos Aires
    Argentina
    ------------------------------

    Original Message


  • 12.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 09-10-2020 08:33
    No replies, thread closed.
    After update all the Softphones the number of complaints reduced a lot.

    The only scenario where we still have issues is when the agents have laptops with multiple network adapters.
    The Softphone is not able to recover its provisioned state if the communication fallback to the Wireless adapter.

    If your problem is the same, please vote for this one:
    https://genesyscloud.ideas.aha.io/ideas/CLCOLL-I-228

    ------------------------------
    Paulo Mesquita
    Spark NZ Trading
    ------------------------------

    Original Message


  • 13.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 09-10-2020 08:43
    No replies, thread closed.
    Thanks again Paulo.

    Just added my vote on the idea.

    Regards.

    ------------------------------
    Jorge Marcelo Negri
    Senior Project Consultant
    Genesys PureCloud Certified Associate
    In Motion Argentina
    Ciudad Autónoma de Buenos Aires
    Argentina
    ------------------------------

    Original Message


  • 14.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 10-31-2024 15:09
    No replies, thread closed.

    We are currently experiencing a similar situation, and the delivery of our project is getting delayed as a result.

    Specifically, the softphone keeps losing connection and frequently requires re-provisioning. We're also encountering protocol errors that necessitate provisioning to resume connections.

    Could you please share how you overcame this issue? Any insights or advice would be greatly appreciated.



    ------------------------------
    Ashokkumar Paramasivam
    NA
    ------------------------------

    Original Message


  • 15.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout
    Best Answer

    Posted 10-31-2024 15:42
    No replies, thread closed.

    Take a look at my coment below:

    Hi George, just to update you and all people who had same problem...

    Regarding the test we had made today, I found something that could be related (or not) with our issues.

     When we look at the Softphone registration, we see an IP address that is different from what we recieve on Edges:

    sip:ES-5CG12163CD_1@130.177.172.179:8060;transport=tcp

    So the desktop have a local IP address 130.177.172.179, that is been NATED to 172.28.221.179, and that is the IP we recieve in the signaling on egdes and phone trunk.

    So the probem is the NAT.

     



    ------------------------------
    David Fradejas Tomás
    Genesys Senior Consultant
    ------------------------------

    Original Message


  • 16.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 11-04-2024 13:01
    No replies, thread closed.

    Thanks David for your response. I see an another post from you -  https://community.genesys.com/discussion/stability-issues-with-purecloud-softphone.

    Does this also have the same problem with the Nating IP.



    ------------------------------
    Ashokkumar Paramasivam
    NA
    ------------------------------

    Original Message


  • 17.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 07-18-2023 11:22
    Edited by David Fradejas Tomás 07-18-2023 12:01
    No replies, thread closed.

    We are experiencing a very similar problem on a client we have where the error indicates  transport protocol error.

    Final customer (endpoints) uses a softphone and connects outside customer firewall, and also have to use customer proxy while connect to Genesys Cloud URLs.

    If they connect using a physical phone, they do not experience any problem, but when using the softphone, the call does not get picked up, giving the error that I mentioned above. In the console and browser crashes we have observed that there is a problem when they try to connect to an Amazon Web Services URL but we are not sure if this is the root cause.

    THe error taht give us in browser is: ["lastConversationError: ",{"id":"7dd3f165-5d71-40d9-bf79-0f81329ca213","errorInfo":{"code":"error.ininedgecontrol.connection.protocol.transport","message":"Transport Failure","messageWithParams":"Transport Failure","messageParams":{"text":"Transport Failure"}}}]

    anyone has any idea? Thanks in advance



    ------------------------------
    David Fradejas Tomás
    Sabio Ibérica, S.A.
    ------------------------------



  • 18.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 07-18-2023 21:01
    No replies, thread closed.

    Just to be sure...what softphone are they using? Or, are they using the Genesys Cloud WebRTC phone?



    ------------------------------
    George Ganahl GCP (Genesys Cloud), CCXP
    Principal PS Consultant
    Genesys
    ------------------------------

    Original Message


  • 19.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 07-19-2023 00:51
    No replies, thread closed.

    Hi George,

    They are using Softphone, not webrtc, and the last version.

    Thanks 



    ------------------------------
    David Fradejas Tomás
    Sabio Ibérica, S.A.
    ------------------------------

    Original Message


  • 20.  RE: Disconnect Type: Error; Error Code: error.ininedgecontrol.connection.protocol.timeout

    Posted 07-28-2023 04:55
    No replies, thread closed.

    Hi George, just to update you and all people who had same problem...

    Regarding the test we had made today, I found something that could be related (or not) with our issues.

     When we look at the Softphone registration, we see an IP address that is different from what we recieve on Edges:

    sip:ES-5CG12163CD_1@130.177.172.179:8060;transport=tcp

    So the desktop have a local IP address 130.177.172.179, that is been NATED to 172.28.221.179, and that is the IP we recieve in the signaling on egdes and phone trunk.

    So the probem in the NAT.

     



    ------------------------------
    David Fradejas Tomás
    Sabio Ibérica, S.A.
    ------------------------------

    Original Message


Related Content