So, this prompt is set as the Profile Greeting on the profile, correct?
If you open Attendant and go to this profile, then click on "Configure Speech Recognition" button at the bottom and click the "Disable Speech Recognition" check the box then test again, does the same problem still occur?
https://help.genesys.com/pureconnect/mergedprojects/wh_iat/desktop/custom_inbound_call_profile.htm > see "Speech Recognition Frame" at the bottom of that page. Not sure if this is it, but worth a quick test.
------------------------------
Drew Drew Bisson
Chief Architect
Genesys - Employees
------------------------------
Original Message:
Sent: 01-27-2021 17:11
From: Wayne Rhodeback
Subject: Unrecognized DTMF
The prompt is 8bit, 8khz, mono .wav. The prompt was added back when COVID started, and has always played fine..
This is normal Attendant OOTB functionality.
The prompt is playing at the Schedule level, and then drops into a menu.
I can see and hear DTMF in the packet capture. It seems as if PureConnect just isn't ready to deal with it.
------------------------------
Wayne Rhodeback
Astute, Inc.
Original Message:
Sent: 01-27-2021 06:58
From: Wayne Rhodeback
Subject: Unrecognized DTMF
I have a PureConnect system that suddenly started ignoring DTMF
I've checked everything.
I see the DTMF in a capture from the MediaServer, and can hear it in the audio stream.
I've actually captured calls where DTMF doesn't work multiple times, then it takes and the caller enters their 15 digit affinity card number, and my handler returns their card balance correctly.
I finally figured out the pattern. I can only get DTMF to work if I remove a prompt at the schedule level above the call flow. A prompt that has been there since the beginning of the COVID pandemic.
That is how they are operating now. Take the prompt out, it's fine. Put the prompt in, it's broken.
#SIP/VolP
#Telephony
------------------------------
Wayne Rhodeback
Astute, Inc.
------------------------------