OK, not ideal, but assuming you are transferring to the Group in Architect, you can set the timeout there. I'm not sure if this will override Group settings. If that doesn't work, you could configure it to attempt the transfer again if it fails (twice, if you want three minutes.) You could either use a loop, or just three transfers daisy-chained together. If you want it to the go to VM, make sure that VM is only enabled on the last attempt.
(BTW, what I'm seeing is that it will ring for up to 2 minutes if you just put a DID on the Group....)
HTH
------------------------------
Paul Simpson
Eventus Solutions Group
------------------------------
Original Message:
Sent: 05-31-2023 11:42
From: Judy Heckbert
Subject: Max ring time for a group
Hi,
I have a request to setup a group with a broadcast ring that will ring for 3 minutes. I have done some testing but it seems like it will ring for 60 seconds and that's it. Is there a way for me to change this so I can achieve the 3 minute ask?
#Unsure/Other
------------------------------
Judy Heckbert
NTT America, Inc
------------------------------