PureConnect

 View Only


Discussion Thread View
  • 1.  SIP/2.0 403 Forbidden on MP-124D audiocode mediapack

    Posted 04-25-2013 19:35
    I am testing CIC 4.0 and the CIC server is responding to the media pack with an error of SIP/2.0 403 Forbidden when a call is trying to be made from the physical phone. I can make a call from the .net client using a station on this media pack so CIC 4.0 seems to be able to talk to it fine. Also this same media pack works fine on CIC 2.4. My best guess is that the CIC 4.0 server is rejecting the SIP invite from this media pack even though I do not appear to have any restrictions on the line access lists, etc. The media pack station is defined in IA as a stand alone station and I would have thought that would "register/allow" it to register with the CIC 4.0, but it must not be enough. Is there something else in IA I need to set to allow this media pack to allo SIP invites from the Media Pack to accepted by the CIC server?


  • 2.  RE: SIP/2.0 403 Forbidden on MP-124D audiocode mediapack

    Posted 04-26-2013 13:38
    You should be able to turn up logging on TS to 80 to see why TS is denying the call.


  • 3.  RE: SIP/2.0 403 Forbidden on MP-124D audiocode mediapack

    GENESYS
    Posted 04-26-2013 13:55
    What port are you using on the MP124 to contact the IC server? If the default 5060, did you create a new line in the Lines container in IA to allow registrations on that port? If you don't want to do that, you need to change the port on the MP124 to use 8060 when contacting the IC server to register/place calls.


  • 4.  RE: SIP/2.0 403 Forbidden on MP-124D audiocode mediapack

    This message was posted by a user wishing to remain anonymous
    Posted 05-13-2013 14:35
    We are getting "No circuit Available" message when we are making out bond call; below I am providing some example call details please check and let me know, is this happening due to any gateway settings? Because customer says they changed some settings but they could not recollect; what exact they did They informed as after this change they are facing this issue. Please help me to resolve this issue 16:32:16: Initializing 16:32:16: Sent to user p.schaller 16:32:16: Uitgaand gesprek: +3160000000 16:32:17: Dialing 16:32:19: Disconnected [Remote Disconnect:Unassigned Number (ISDN Cause Code 01)/404:SIP - Not Found] 16:32:19: ISDN-oorzaakwaarde: 1 16:32:19: %13680% 15:35:53: Initializing 15:35:53: Entered Workgroup LS_EHH_Algemeen_CB 15:35:53: Sent to user S.Pot 15:35:53: Uitgaand gesprek: 00000000000 15:35:54: Dialing 15:36:04: %13682% 15:36:04: Disconnected [No Circuit Available:Network Out Of Order (ISDN Cause Code 38)/503:SIP - Service Unavailable] 09:33:51: Station Audio 09:33:51: Sent to user M.snijder 09:33:51: Connected 09:33:51: Manual Dialing 09:33:51: Uitgaand gesprek: 00000000000 09:33:51: Dialing 09:33:52: %13682% 09:33:52: Disconnected [Remote Disconnect:Normal, Specified (ISDN Cause Code 31)/480:SIP - Temporarily Unavailable]


Need Help finding something?

Check out the Genesys Knowledge Network - your all-in-one access point for Genesys resources